How To Flash MTK Devices Using Sp Flash Tool

Items Needed For Flashing

• PC
• Vcom Drivers
• Phone To Be flashed
• USB Cable
• Firmware File
• Sp Flash Tool

Step By Step To Flash The Device

1. Download and Launch SP Flash Tool as Administrator As Shown Below Image

2. Click on Scatter-loading by the right As Shown Below Image

3. In the window that pops up, select the scatter file for your phone model Which you have Downloaded and Extract.

4. A list with ticked boxes should appear in SP flash tool (preloader, boot, recovery etc) As Shown Below Image.

5. Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it). Download Only is the safest flash option. You could use Firmware Upgrade in some instances but avoid Format as much as you can as shown below.

6. Stop should now be prominent while other options should be grayed out. Now Connect the switched off phone (with battery inside) to the PC via USB cord without holding any button And A progress bar should start running As shown Below

7. Wait un-till you get a Success message (green circle with OK), do not interrupt before then.

8. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone. Ensure to do a factory reset in recovery mode if you encounter Any Error.

Please If You Encounter Any Error Whiles Installing The Drivers, please Leave your comments Below And We will Get Back To You Or Chat Us Via Our Whatsapp